1 ftr-k1 series n features l 1 pole, 25a, 1 form a l 2 coils latching type l high insulation (between coil and contacts) insulation distance: clearance min. 6.4mm creepage min. 9.5mm dielectric strength: 5,000vac surge strength: 8,500v l cadmium free contact for eco-program l plastic materials - ul 94 fame class v-0 l flux proof, cat ii l rohs compliant please see page 5 for more information actual marking does not carry the type name : "ftr" e.g.: ordering code: ftr-k3lab012w actual marking: k3lab012w power relay 1 pole - 25a latching relay ftr-k3l series n partnumber information ftr-k3 l a b 012 w [example] (a) (b) (c) (d) (e) (f) (a) relay type ftr-k3 : ftr-k3 series (b) operating function l : latching type (c) contact confguration a : 1 form a / pcb type j : 1 form a / tab type (d) coil power b : standard sensitive (0.9w) (e) coil rated voltage 012 : 5.....24vdc coil rating table at page 3 (d) contact material w : agsno 2 preliminary new relay, production not started, engineering samples available
2 ftr-k1 series ftr-k3l series preliminary n specification * minimum switching loads mentioned above are reference values. please perform the confrmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. item ftr-k3l contact data confguration 1 form a construction single material silver tin oxide (agsno 2 ) resistance (initial) max. 100 mohm at 6vdc, 1a contact rating (resistive) 25a, 250vac max. carrying current 30a max. switching voltage 250vac max. switching power 6,250va max. switching current 25a min. switching load * 100ma, 5vdc life mechanical min. 1 x 10 6 operations electrical 25a, 250vac, min. 100 x 10 3 operations coil data rated power (at 20 c) 900mw operating temperature range -40 c to +60 c (no frost) timing data set (at nominal voltage) max. 20ms (without bounce) reset (at nominal voltage) max. 20ms (without bounce) coil excitation time (at nominal voltage) min. 30ms insulation resistance (initial) min. 1,000mohm at 500vdc dielectric strength between contacts 1,000vac (50/60hz) 1min between coil to contacts 5,000vac (50/60hz) 1min surge strength coil to contacts 8,500v / 1.2 x 50s standard wave clearance 6.4mm creepage 9.5mm other vibration resistance misoperation>1us 10 to 55hz double amplitude 1.5mm endurance 10 to 55hz double amplitude 1.5mm shock misoperation>1us min. 200m/s2 (11 1ms) endurance min. 1,000m/s2 (6 1ms) weight approximately 25 g sealing flux proof cat ii
3 ftr-k1 series n coil rating coil code rated coil voltage (vdc) coil resistance +/- 10% (ohm) set/reset voltage rated power (mw) min. (vdc) * max. (vdc) * 005 5 28 4.0 9.0 900 012 12 160 9.6 21.6 024 24 640 19.2 43.2 note: all values in the tables are valid for 20c and zero contact current. * specifed operate values are valid for pulse wave voltage. ftr-k3l series preliminary type compliance contact rating ul ul 508 flammability: ul 94-v0 (plastics) 25a, 277vac vde 0435 25a, 250vac, 60oc n safety standards n coil polarity coil terminal a b c set - + reset + - see schematics at page 4.
4 ftr-k1 series n dimensions ftr-k3l series l external dimensions type j l schematics l pc board mounting hole layout (bottom view) unit: mm preliminary type a type j type a top view bottom view bottom view
5 ftr-k1 series 1. general information l all signal and power relays produced by fujitsu components are compliant with rohs directive 2002/95ec including amendments. l cadmium as used in electrical contacts is exempted from the rohs directives on october 21st, 2005. (amendment to directive 2002/95/ec) l all of our signal and power relays are lead-free. please refer to lead-free status info for older date codes at: http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf l lead free solder plating on relay terminals is sn-3.0ag-0.5cu, unless otherwise specifed. this material has been verifed to be compatible with pbsn assembly process. 2. recommended lead free solder profle l recommended solder sn-3.0ag-0.5cu. rohs compliance and lead free information 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. tin whiskers l dipped snagcu solder is known as presenting a low risk to tin whisker development. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c solder bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec. ftr-k3l series preliminary
6 ftr-k1 series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/components europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2010 fujitsu components europe b.v. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. the contents, data and information in this datasheet are provided by fujitsu component ltd. as a service only to its user and only for gen - eral information purposes. the use of the contents, data and information provided in this datasheet is at the users own risk. fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen - sive, complete and up to date. fujitsu components europe b.v. and affliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. nor do fujitsu components europe b.v. and affliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ftness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. rev . december 07, 2010 ftr-k3l series preliminary
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: fujitsu: ? ftr-k3lab012w? ftr-k3lab024w? FTR-K3LJB012W? ftr-k3ljb024w
|
